Care Instructions

PRODUCT CARE GUIDE

How to Care

To keep your Kaffelogic Nano 7 in top condition,
we provide instructions for daily maintenance and periodic deep cleaning.

SECTION 01

Daily Care

๐Ÿงฝ
Wipe the inner glass
Regularly wipe the inside glass of the chaff collector with a damp paper towel. Getting into the habit of wiping it before grime builds up will help maintain cleanliness.
๐Ÿชฅ
Brush the mesh filter
After each roast, brush the mesh disk inside the lid to remove chaff. Ensuring the filter disk holes are not clogged will maintain consistent performance.

SECTION 02

Deep Cleaning

As you continue roasting, coffee oils can accumulate, and the glass may become less transparent than it used to be. Restoring it to like-new condition is not a difficult task.

First, disassemble the chaff collector. A step-by-step disassembly guide is included with the product, but if you don't have it on hand, follow the steps below.

โ–ผ Disassembly Instructions (10 Steps)
ใ‚นใƒ†ใƒƒใƒ—1
1
Step 01
Rotate the lid counter-clockwise to unlock it.
ใ‚นใƒ†ใƒƒใƒ—2
2
Step 02
Remove the lid, just as you would when discarding chaff after roasting.
ใ‚นใƒ†ใƒƒใƒ—3
3
Step 03
Remove the chaff collection container.
ใ‚นใƒ†ใƒƒใƒ—4
4
Step 04
Turn the chaff collector upside down.
ใ‚นใƒ†ใƒƒใƒ—5
5
Step 05
Rotate the bottom cap counter-clockwise to unlock it.
ใ‚นใƒ†ใƒƒใƒ—6
6
Step 06
Remove the bottom cap.
ใ‚นใƒ†ใƒƒใƒ—7
7
Step 07
Remove the rubber seal.
ใ‚นใƒ†ใƒƒใƒ—8
8
Step 08
Carefully remove the inner glass tube.
โ–ผ Recommended Cleaners
  • Cafetto EVO
  • Urnex
  • Other non-abrasive espresso machine cleaners containing sodium carbonate/sodium bicarbonate
โ–ผ Cleaning Procedure
1
Soak all removed parts in an appropriate cleaning solution.
2
For stubborn stains, gently remove them with a soft cloth.
3
Rinse all parts thoroughly with clean water.
โš ๏ธ
Important note before assembly
Always ensure all parts are completely dry before reassembling. Reassembling with moisture present can cause malfunctions.
โ–ผ Assembly (Parts Diagram)
ใƒใƒฃใƒ•ใ‚ณใƒฌใ‚ฏใ‚ฟใƒผใฎใƒ‘ใƒผใƒ„ๆง‹ๆˆๅ›ณ
The diagram above illustrates the spatial relationship of the parts that make up the chaff collector. You can reassemble it by performing the disassembly steps in reverse order.
  • 1
    Lid
  • 2
    Chaff Collection Container
  • 3
    Main body (outer casing with window)
  • 4
    Rubber seals (2 locations)
  • 5
    Inner glass tube
  • 6
    Outer glass tube
  • 7
    Bottom cap